Welcome: Guest
Log In
Shopping Cart
(0 items)
Home
Catalog
Toners
My Account
Contact Us
My List
Printer Fusers
and Service Parts for:
HP
Lexmark
QUICK SEARCH
Select a printer type
HP
---------------
Color Laserjets
B&W Laserjets
DesignJets
LEXMARK
---------------
Color Laser
Monochrome Laser
Select a printer model
Select a printer keyword
HP Color LaserJet 1500LXI Printer Q2597A
Status:
Available
Condition:
OEM
Your Price:
RFQ
Printer Parts
Printer Information
Related Models
Airflow Guide
RB2-9904-000CN - Airflow Guide (duct) - Black plastic insert piece which runs the width of the printer and has an air flow hole on right side
RB3-0025-000CN - Airflow guide (duct) / fan holder bracket assembly (Quartz Gray plastic)
Arm
RB3-0089-000CN - Top cover rack arm (Black) - Plastic arm with teeth on bottom edge - Disengages the imaging drum/transfer assembly drive cams when the top door is open
RB3-0089-030CN - Top cover rack arm (Black) - Plastic arm with teeth on bottom edge - Disengages the imaging drum/transfer assembly drive cams when the top door is open
Belt
RB3-0063-000CN - Paper feed belt - Small black rubber belt approximately 1/8 inch wide with little 'A' shaped ribs on it
RB1-8668-030CN - Feed guide drive belt - Small belt approximately 5/16 inch wide with 'A' shaped ribs on it
Bezel
RB3-0035-000CN - Interface bezel (Quartz Gray plastic) - Vertical cover that surronds the interface connectors
Bushing
RB2-2973-000CN - Support bushing
RB2-3043-000CN - Left roller bushing - Acts as the bearing and retainer for the left end of the paper pickup roller assembly (tray 1)
RB2-3044-000CN - Right roller bushing - Acts as the bearing and retainer for the right end of the paper pickup roller assembly (tray 1)
RB2-9808-000CN - Bushing/shaft retainer assembly - Black plastic
RB2-9809-000CN - Bushing/shaft retainer assembly (White plastic)
RB3-0014-000CN - Bushing assembly (black plastic bushing with small guide roller on top)
RS5-1635-000CN - Shaft bushing for HP Color LaserJet 1500 Series
RS5-1637-000CN - Bushing (black plastic)
RS5-1638-000CN - Bushing for HP Color LaserJet 1500 Series
Cable
Q2488-60104 - Flat flexible cable
Q3948-60144 - Flat flexible cable (FFC) assembly - Connects between the formatter assembly (J1001) and the DC controller board (J101)
C6518A - Universal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector - 2.0m (6.6ft) long
RG5-6971-000CN - Cable assembly (two 3-pin connectors and a spad lug)
RG5-6974-000CN - Cable assembly for HP Color LaserJet 1500 Series
RG5-7130-000CN - High voltage cable assembly
RG5-7108-000CN - Cable assembly (two 8-pin connectors, Purple wire)
RG5-7109-000CN - Cable assembly (two 7-pin connectors)
RG5-7114-000CN - Cable assembly (two 4-pin connectors) with shield
RG5-7115-000CN - Cable assembly (two 3-pin connectors)
RG5-7128-000CN - Cable assembly (four 3-pin connectors)
RG5-7129-000CN - Cable assembly (two connectors and two spade lugs)
RG5-7106-000CN - Cable assembly (two 2-pin connectors)
RG5-7146-000CN - High voltage cable assembly (two 15-pin connectors and two 14-pin connectors)
RG5-7107-000CN - Cable assembly (8-pin, red wire)
RG5-7117-000CN - Cable assembly (two 3-pin connectors)
RG5-7122-000CN - Cable assembly - 'Y' type cable (three connectors) - The 14-pin connector splits into an 8-pin connector and a 6-pin connector
RG5-7123-000CN - Grounding cable assembly
RG5-7126-000CN - Cable assembly (two 5-pin connectors)
RG5-7144-000CN - Cable assembly (with seven connectors)
RG5-7145-000CN - Front cable assembly (six connectors)
RG5-7161-000CN - Cable assembly (two 3-pin connectors and a spad lug)
RH2-5524-000CN - Flat flexible cable (FFC) assembly - Connects between the formatter assembly (J1001) and the DC controller board (J101)
RG5-7114-020CN - Cable assembly (two 4-pin connectors) with shield - Connects between the cartridge drive motor and the DC controller board
Carousel
RG5-6910-080CN - Carousel (Rotary) assembly - Includes the carousel assembly, the support assembly, end plates, drive gears and shaft, sensors, and cables
Cleaner
5090-3379 - Toner cleaning cloth - Specially treated cloth for absorbing toner or Ink (1 per package) - Ideal for cleaning up toner spills and Ink for your plotter / copier / printer
Clip
WT2-5056-000CN - Cable clip - `C` shaped White plastic
XD2-1100-502CN - E-ring clip for HP Color LaserJet 1500 Series
Clutch
RH7-5366-000CN - Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft
RH7-5389-000CN - Electromagnetic clutch assembly (24V) - Electrical clutch between the clutch drive gear and shaft
Connector
RH2-5519-000CN - Connector assembly - For optional paper tray
RH2-5520-000CN - Connector for the fusing assembly - Seven small contol pins plus three separated high current pins
WS1-6336-000CN - Connector assembly - For optional bottom paper tray
WT2-5737-000CN - Drawer connector - Connector located on bottom of tray assembly frame on right side, which connects tray assemblies to each other
Control Panel
RG5-6927-000CN - Control panel assembly (mechanical only) - Includes the 'Rotate Carousel', 'Cancel Job' and the 'Go' buttons, plus the various indicator light pipes - All switches and LED's are on the formatter PC board
Cover
RB3-0028-000CN - Left side cover (Quartz Gray) - Does not include any attaching parts
RB3-0052-000CN - Gear Cover (Small Black plastic cover) - Covers the left end of the feed drive shaft
RB3-0030-000CN - Upper rear cover (Quartz Gray) - Mounts on the upper rear of the printer above the face-up output tray door
RB3-0120-000CN - Solenoid cover (Steel) - For magnetic wave sheilding
RB3-0032-000CN - Face-down paper output L-Shaped cover ( Blue) - Serves as the rear of the tray for the face-down output tray on top of the printer
RB3-0102-000CN - Front inner cover (Blue) - Mounts on the front frame above the multi-purpose input tray
RB3-0103-000CN - Front lower cover (blue plastic) - Front lower strip below the multi-purpose input tray - Has recessed area for the printer logo
RB3-0104-000CN - Roller cover - Covers the multipurpose paper pickup roller assembly - Mounts on the lower front of the front frame assembly
RG5-6900-000CN - Top cover assembly (blue plastic) - Includes the molded-in face-down output tray and the lift-up top cover door assembly
RG5-6902-000CN - Left side cover assembly (Quartz Gray) plastic - Includes the power switch button, rod and spring (The power switch is located on the low voltage power supply board)
RG5-6953-000CN - Right side cover assembly (Quartz Gray) plastic - Includes the DIMM memory door
RB2-9916-020CN - Cover - For the engaging motor (PM704) - Mounts on the upper left side of the rear frame assembly
RB3-0120-020CN - Solenoid cover (Steel) - For magnetic wave sheilding - Mounts over the solenoid on the right side of the front frame assembly
Damper
RB2-6248-000CN - Damper assembly (Gray plastic piece with small 13-tooth gear on it)
Door
RB3-0033-000CN - Memory access door (Quartz Gray perforated plastic) - Allows access to the printer memory slots - Mounts on the right side cover
RF5-4007-000CN - Top cover door (blue plastic) - For accessing the toner cartridges and the imaging drum/transfer assembly - Mounts to the top cover frame
Drive Assembly
RG5-6911-000CN - Rotary drive assembly - Includes the carousel rotating motor (DCM703), toner cartridge drive motor (PM705), developing rotary stopper solenoid (SL93), bracket, and gears
Fan
RH7-1537-000CN - Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA)
RH7-1630-000CN - Cooling fan (Panaflo Model FBA08T24H - 80mm X 80mm X 15mm high, DC brushless, 24V DC, 190mA)
Flag
RB2-9925-000CN - Sensor arm and flag - Activates the photosensor (Does NOT include the roller)
RB3-0111-000CN - Paper flag - Plastic rod with paper sensing flag on one end and sensor activator flag on the other
RB3-0135-000CN - Test print flag (Black lever)
Foot
RB2-6297-000CN - Rubber foot - Square self-adhesive rubber foot
Fuser Assembly
RG5-6903-000CN - Fuser Assembly (For 110V to 127V operation) - Bonds the toner to the paper with heat
RG5-6913-000CN - Fuser Assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat
RM1-3525-000CN - Fusing assembly (For 220V to 240V operation) - Bonds the toner to the paper with heat - Slides in and locks in lower rear of printer
Gear
RB3-0022-000CN - 22 tooth gear (Black plastic) - Small gear with diagonally cut teeth
RB3-0091-000CN - 16 tooth gear (Black plastic) - Gear with large stop tooth and shaft lock tab
RB3-0092-000CN - 15 tooth gear with drive shaft (Black plastic)
RG5-6938-000CN - Gear assembly - Metal plate with two White plastic gears attached
RS7-0418-000CN - 26 tooth gear (Black plastic) - Has 1/8th portion of gear cut away
RS7-0424-000CN - Dual gear - 20 tooth / 40 tooth
RS7-0425-000CN - 30 tooth gear (White plastic)
RS7-0426-000CN - Dual gear - 26 tooth / 50 tooth (White plastic)
RS7-0428-000CN - 30 tooth gear (White plastic)
RS7-0429-000CN - 26 tooth gear (White plastic) - Has recess for shaft drive pin
RS7-0435-000CN - Dual gear - 32 tooth / 37 tooth (White plastic)
RS7-0436-000CN - Dual gear - 37 tooth / 43 tooth (White plastic)
RS7-0437-000CN - 51 tooth gear (White plastic)
Gear Assembly
RG5-6938-030CN - Gear assembly - Metal plate with two White plastic gears attached
Ground
RB2-9942-000CN - Grounding plate - Provides grounding for the top-of-page sensor and shielding for the density sensor boards
RB3-0119-000CN - Grounding plate
Guide
RB2-9903-000CN - Cable guide (Quartz Gray plastic)
RB2-9912-000CN - Top output bin guide - Small curved ribbed black plastic piece
RB2-9954-000CN - Left paper feed guide (small Black plastic arm)
RB2-9955-000CN - Right paper feed guide (small Black plastic arm)
RG5-6935-000CN - Left cartridge guide assembly
RF5-4049-000CN - Entrance guide assembly - Angled metal guide between the registration roller and the transfer roller
RG5-6935-020CN - Left cartridge guide assembly
RG5-6929-000CN - Separation guide assembly - Includes the plastic guide, label, and the two small spring loaded rollers
RG5-6930-000CN - Lower separation guide assembly - Includes the guide bracket, paper output sensor (PS1) and flag, exit drive shaft with two rubber rollers, shaft gear, and idler gear
RG5-6951-000CN - Paper guide assembly - Paper width adjustable guide assembly for the multi-purpose front input tray (tray 1)
Hinge
RB2-3041-000CN - Tray hinge - For the left side of the multi-purpose front input tray (tray one)
RB2-3042-000CN - Tray hinge - For the right side of the multi-purpose front input tray (tray one)
RB2-6405-000CN - Tray hinge - For the left side of the multi-purpose front input tray (Tray 1)
RB2-6406-000CN - Tray hinge - For the right side of the multi-purpose front input tray (Tray 1)
Holder
RB2-9924-000CN - Sensor assembly mounting holder
RB3-0006-000CN - Holder - Housing for the fusing connector assembly
RB3-0023-000CN - Interlock switch holder (Quartz Gray plastic) - Does NOT include the micro-switch
Insulator
RB3-0007-000CN - Insulating sheet (Transparent plastic)
RB3-0056-000CN - Insulating sheet (Transparent plastic)
Label
RS6-8662-000CN - Label for Color LaserJet 2500 Series, Color LaserJet 1500 Series, Color LaserJet 2550 Series
Laser Scanner
RG5-6880-000CN - Laser/scanner assembly
RG5-6890-030CN - Laser/scanner assembly
Lever
RB3-0178-000CN - Right side lock release lever
RB3-0179-000CN - Left side lock release lever
Manual
Q2488-90901 - Q2488-90901
Motor
RF5-4010-020CN - Main motor assembly - Large motor mounted on a controller PC board - Mounts on the inside of the metal right side frame assembly
RF5-4010-000CN - Main motor assembly - Large motor mounted on a controller PC board
RG5-6958-000CN - Rotary motor assembly
RH7-1533-000CN - Stepping motor - 24V DC
RH7-1535-000CN - Stepping motor (24V)
RH7-1625-000CN - Stepping motor - 24VDC
RH7-1629-000CN - Stepping motor - 24V DC
NamePlate
Q2488-40001 - Nameplate - Color LaserJet 1500L printer logo
Pad
RF5-4012-000CN - Separation pad assembly - Includes the separation pad, holder and spring
RF5-4047-000CN - Light blocking pad assembly - Black plastic frame with soft rubber gasket and stiff conductive Mylar piece (grounded)
Paper
Q1298A - LaserJet Satin finish tough paper - A size (8.5 x 11-inches) - Will not tear and will withstand outdoor weather conditions - Can print on both sides
Q1298B - LaserJet Satin finish tough paper - A4 size (21.0cm x 29.7cm) - Will not tear and will withstand outdoor weather conditions - Can print on both sides - 50 sheets per box
5851-1468 - LaserJet printer family paper specification guide
PC Board
Q1894-60001 - Formatter board only - Does not include the metal formatter cage covers
C9705-69003 - DC controller board - Mounts on the left side of the printer (Behind the formatter board assembly)
RG5-6967-000CN - Registration sensor PC Board - Small board with flag activated photosensor
RG5-6964-000CN - Carousel position and toner level photoelectric sensor PC board - L Shaped PC board with the two sensors
RG5-6965-000CN - Waste toner sensor PC board - Small board with an LED and photoelectric sensor - Monitors the level of the excess toner deposited in the imaging drum/transfer assembly
RG5-7613-000CN - Registration sensor PC Board - Small board with flag activated photosensor
RG5-7609-000CN - Carousel position and toner level photoelectric sensor PC board - `L` Shaped PC board with the two sensors
RG5-7612-000CN - Top of page photoelectric sensor PC board - Includes the photoelectric top of page sensor and the print engine test switch
RH7-7146-000CN - Density photoelectric sensor PC board
RH7-7158-000CN - Density photoelectric sensor PC board
WG8-5382-000CN - Sensor PC board - Small board with flag activated photosensor
WG8-5593-000CN - Sensor PC board - Small board with flag activated photosensor
WG8-5836-000CN - PHOTOINTERRUPTER Stapler Stacker
Plate
Q2488-00001 - Cover plate (metal)
RB2-9916-000CN - Mounting/grounding plate
RB3-0057-000CN - Transfer slide plate - Small 'U' shaped metal insert plates
RB3-0065-000CN - Contact plate - copper clad metal spring - Holds the left end of the small 500 Meg-ohm resistor
RB3-0066-000CN - Contact plate - copper clad metal spring - Holds the right end of the small 500 Meg-ohm resistor
RB3-0286-000CN - Contact plate for HP Color LaserJet 2500 Seriess
RB3-0010-030CN - Feed plate - Center metal plate with slots that the ribs on the middle frame assembly go through
Power Cord
8120-6800 - Power cord (Flint Gray) - 3-wire, 16 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 240V in Israel)
8120-6809 - Power cord (Dove Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in the U.K., Hong Kong, Singapore, Malaysia)
8120-6810 - Power cord (Flint Gray) - 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V operation in Australia, New Zealand)
8120-6811 - Power cord (Flint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (for 220V in Europe, Saudi Arabia, South Africa, India, and Korea)
8120-6812 - Power cord (Flint Gray) - 18 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 120VAC in the United States, Canada, Mexico, Philippines, and Taiwan)
8120-6813 - Power cord (Dove Gray) - Three Conductor, 2.3M (7.5ft) long - Has straight (F) C13 receptacle (For 240VAC in the United Kingdom, Hong Kong, Singapore, Malaysia)
8120-6814 - Power cord (Flint Gray) - 17 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220VAC in Denmark)
8120-6815 - Power cord (Flint Gray) - 17 AWG, three conductor, 2.3m (7.5ft) long - Has straight (F) C13 receptacle (For 220VAC in Switzerland)
Power Supply
RG5-6960-000CN - High voltage power supply board (HVT) assembly - Has contacts for the eight high voltage springs in the printer
RG5-7124-000CN - Sub-high voltage board - Small auxillary PC board
RG5-7616-000CN - Sub-high voltage board - Small auxillary PC board
RH3-2241-000CN - Low voltage power supply - For 110V to 127V AC operation - Includes the AC power input connector and power switch
RH3-2243-000CN - Low voltage power supply - For 220V to 240V AC operation - Includes the AC power input connector and power switch
Pressure Assembly
RG5-6943-020CN - Carousel pressure (support) assembly - Includes the main rear support, E-label reader assembly, engaging sensor, and the engaging rod shaft - Primary support structure for the toner cartridge carousel
RG5-6943-000CN - Carousel pressure (support) assembly - Includes the main rear support, E-label reader assembly, engaging sensor, and the engaging rod shaft
Pulley
RB3-0061-000CN - Pulley roller (accommodates three feed belts) - Small black roller approximately 3.49cm (1-3/4 inches) long with three ball type pulleys
RB3-0067-000CN - Pulley roller (accommodates one feed belt) - Small black roller approximately 1.59cm (5/8 inch) long with one ball type pulley
Rack Slide
RB3-0090-000CN - Rack slide - White plastic piece with gear teeth layed out in rack form on both sides
Reader
RG5-6956-000CN - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board
RG5-6957-000CN - E-label reader assembly - Connects cartridge nonvoliatile memory to the DC controller board
RG5-7131-000CN - E-label reader (contact board ONLY) - Connects the cartridge nonvoliatile memory to the DC controller board
RG5-7132-000CN - E-label reader assembly - Connects cartridge nonvoliatile memory to the DC controller board
Rod
RB3-0037-000CN - Power switch rod - Goes between the power button and the power switch on the low voltage power supply board
Roller
RB2-7195-000CN - Sensor flag roller (small White plastic roller)
RB2-9908-000CN - Pressure roller (small Black hard plastic disk shaped roller)
RB2-9909-000CN - Pressure roller (small Black hard plastic 'solid' roller)
RB3-0012-000CN - Belt roller - Small oval shaped roller approximately 1-3/4 inches long
RB3-0160-000CN - Paper pickup roller ('D' shaped)
RF5-4040-020CN - Transfer roller assembly - Long black foam type roller - Transfers static charge to paper Part RF5-4040-000CN is no longer supplied. Please order the replacement, RF5-4040-020CN
RG5-6897-020CN - Upper top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, two anti-reversing flaps, and the drive gear
RG5-6936-000CN - Lower top bin output roller assembly - Includes the shaft with four rubber rollers, two bushing/shaft retainers, and the drive gear
RG5-6939-020CN - Registration roller assembly - Includes the roller, bushings, mounting plate, paper sensor, and the sensor flag
RG5-6952-000CN - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1)
RG5-6952-020CN - Paper pickup roller assembly - Includes the shaft, guide assembly cams, the D-shaped roller, and roller retainers - Picks paper from the multipurpose front input tray (tray 1) - Mounts in the lower portion of the front frame assembly
Screw
0515-2908 - Pan head machine screw with washer - M3.0 x 0.5, 6mm long, Number 2 Phillips
Shaft
RB2-4933-000CN - Lock release shaft - Small shaft with locking tab - Does NOT include the lock release lever
RB3-0011-000CN - Feed drive shaft - Long shaft with eight feed belt ball type pulleys and one ribbed feed guide drive belt pulley
RB3-0060-020CN - Idler gear shaft - Short metal rod
Shield
RB2-9932-000CN - RFI shield - Parallel wire form mounted over the fan
Shutter
RG5-6940-050CN - Registration shutter assembly - Includes the metal roller, mounting frame, grounding springs, and the dual coupling gear
Sideplate
RG5-6932-060CN - Right side plate assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701)
RG5-6932-070CN - Right side plate assembly - Includes the front half of the metal frame assembly, gears, imaging drum/transfer assembly drive cams, cover engaging mechanism, roller engaging clutch (CL2), and main drive motor (DCM701) - Mounts on the right side
RG5-6934-000CN - Right rear side plate assembly - Includes the rear half of the metal right side plate, the fusing assembly drive motor and the three associated gears
RG5-6942-000CN - Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridges
RG5-6942-030CN - Left side carousel plate assembly - End plate under the rotational toner cartridge carousel - Includes all of the high voltage contacts for the toner cartridges - Mounts on the metal carousel support frame
Software
Q2488-60109 - HP Color LaserJet 1500 series printer drivers and software (release date: 18 June, 2003) - (English, French, Italian, German, Spanish, Portuguese (Brazilian), Dutch, and Arabic)
Q2488-60111 - HP Color LaserJet 1500 series printer drivers (Version 2.0) and software (English, Traditional Chinese, Simplified Chinese, Korean, and Thai)
Q2488-60110 - HP Color LaserJet 1500 series printer drivers (Version 2.0) and software (English, French, Czechoslovakian, Polish, Russian, Hungarian, Danish, Norwegian, Finnish, Swedish, Turkish, and Hebrew)
Solenoid
RH7-5337-000CN - Solenoid assembly
RH7-5340-000CN - Solenoid assembly
RH7-5384-000CN - Solenoid assembly
Spring
RB2-9905-000CN - Torsion spring for HP Color LaserJet 2500 Series
RB2-9906-000CN - Torsion spring for HP Color LaserJet 1500 Series
RB2-9952-000CN - Tray 1 flag spring - Provides torsion for the tray 1 paper sensor flag
RB3-0015-000CN - Compression spring
RB3-0016-000CN - Electrical contact spring - Spring steel wire with compression springs formed on both ends
RB3-0042-000CN - Electrical contact spring
RB3-0043-000CN - Electrical contact spring
RB3-0044-000CN - Electrical contact spring
RB3-0045-000CN - Electrical contact spring
RB3-0046-000CN - Electrical contact spring
RB3-0047-000CN - Electrical contact spring
RB3-0048-000CN - Electrical contact spring
RB3-0121-000CN - Right retaining spring - Helps to secure and ground the imaging drum/transfer assembly in the printer
RB3-0122-000CN - Left retaining spring - Helps to secure the imaging drum/transfer assembly in the printer
RS6-2030-000CN - Tension spring for HP Color LaserJet 1500 Series
RS6-2759-000CN - Compression spring
RS6-2766-000CN - Tension spring for HP Color LaserJet 1500 Series
Static Dissipater
RB3-0009-000CN - Static eliminator ground plate - Right angled metal piece with small teeth on top edge
Support
RB3-0062-000CN - PC board support (Black plastic holder)
RG5-6907-030CN - Laser/scanner support assembly (sheet metal plate)
Switch
RH7-6051-000CN - Microswitch with lever activator
Thermistor
RH7-7149-000CN - Thermistor for HP Color LaserJet 2500 Series
RH7-7159-000CN - Thermistor for HP Color LaserJet 2820 Series
Tray
RB3-0019-000CN - Toner catch tray (curved Black plastic piece) - Holds residual toner from photosensitive drum
RB3-0176-000CN - Face-Up output tray door (ONLY)
RG5-6931-000CN - Face-up output tray assembly - Includes the pull-down door and fusing assembly locking bracket (Does NOT include the lock releases)
Tray Assembly
RG5-6937-000CN - Multi-purpose front input tray assembly (tray-1) - Includes the front cover piece, pull-out paper support, and the flip-out extender
HP Color LaserJet 1500LXI Printer
Manufacture:
HP
MPN:
Q2597A
Description:
HP Color LaserJet 1500LXI Printer
Condition:
OEM
Warranty:
1 year warranty with OEM supplies from the manufacture.
Product Options:
OEM is not available
Image/s:
All Images are subject to correction, more than one part number may share the same image.
Product Tags:
Q2597A
Color Laser Q2597A
CB506-67901
HP
HP Color laserjet 1500L Color A4 printer
Q2488A
HP
HP Color laserjet 1500 Color A4 printer
Q2489A
Not Logged In