Q3948-40007 | ADF cover assembly (ONLY) - Covers the paper pickup and feed mechanism |
Q3948-67914 | Internal cover kit - Includes the curved plastic cover (with recessed area for grasping the handle on the imaging drum/transfer assembly) and the cartridge removal label |
C7309-40153 | Cleanout assembly strip - Green plastic bar with two grab tabs - Can be removed to help clear paper jams in the automatic document feeder assembly |
RB3-0052-000CN | Gear Cover (Small Black plastic cover) - Covers the left end of the feed drive shaft |
RB3-0120-000CN | Solenoid cover (Steel) - For magnetic wave sheilding |
RB3-0104-000CN | Roller cover - Covers the multipurpose paper pickup roller assembly - Mounts on the lower front of the front frame assembly |
RB3-0166-000CN | Bottom inner cover (Black) plastic - One covers the paper feed sensor in the center and the other covers sensor wires toward the right side |
RB3-0282-000CN | Inner cover - Covers the small interconnecting PC board |
RB3-0283-000CN | Inner cover - Covers the bottom of the connector that interconnects the input tray base to the printer |
RB3-1032-000CN | Fusing assembly upper cover - Ribbed cover with end caps |
RB3-1087-000CN | Top cover for HP Color LaserJet 2820 Series |
RB3-1123-000CN | Top cover (ONLY) - Has molded-in tray for face down paper output - Does NOT include lift-up door or any other attaching parts |
RB3-1125-000CN | Upper front cover - Rectangular plastic piece with recess for the printer logo |
RB3-1128-000CN | Left side cover (ONLY) - Does NOT include the vent cover or power switch button |
RB3-1129-000CN | Right side cover (ONLY) - Does NOT include the memory access door or grounding plate |
RB3-1133-000CN | Upper front cover (ONLY) - Back support for the multipurpose cover assembly |
RB3-1137-000CN | I/O cover - Rectangular plastic cover with a recessed cutout for the interface connectors |
RB3-1126-000CN | Upper left cover - Small cover that is part of the inner side wall in the cartridge access area and provides support for the exterior left side cover |
RB3-1130-000CN | Upper rear cover assembly - Also guides the paper from the fusing assembly to the top output (face down) tray |
RB3-1131-000CN | Left rear cover - 'U' shaped cover that mounts on the under-side of the extension for the left scanner hinge |
RB3-1132-000CN | Right rear cover - 'U' shaped cover that mounts on the under-side of the extension for the right scanner hinge - Covers the scanner interconnection cables |
RB3-1134-000CN | Internal cover (ONLY) - Curved plastic piece with recessed area for grasping the handle on the imaging drum/transfer assembly - Mounts towards the front of the printer just above the multipurpose tray |
RB3-1135-000CN | Lower front cover - Rectangular plastic strip - Mounts just below the multipurpose input tray on the front of the printer |
RB3-1136-000CN | Face-down paper output cover ('L' shaped plastic) - Serves as the rear of the tray for the face-down output on top of the printer |
RB3-1139-000CN | Vent cover - Rectangular plastic cover with molded-in ventilation louvers |
RB3-1140-000CN | Rear cover / face-up output tray (ONLY) - When opened, routes printed pages to this cover/tray for face-up output |
RB3-1168-000CN | Left side support frame/cover assembly - For the base on the 250-sheet input tray assembly |
RB3-1170-000CN | Front cover - Mounts on the front of the cassette assembly for the 250-sheet input tray assembly |
RF5-4053-000CN | Upper right cover - Small cover that has a cutout for the scanner release button |
RF5-4054-000CN | Upper right cover assembly - Includes the cover and clear plastic door - Small cover that has a cutouts for the scanner release button and camera (photo) memory interface card slots (Does NOT include the PC boards) |
RG5-7597-000CN | Top cover assembly - Includes the rear cover with molded-in face-down output tray and the lift-up toner cartridge / imaging drum and transfer assembly cartridge access door - Does NOT include the upper front cover |
RG5-7598-000CN | Left side cover assembly - Includes the main cover, vent cover, power switch button, rod and spring (The power switch is located on the low voltage power supply board) |
RG5-7604-000CN | Rear cover / face-up output tray assembly - Includes the tray/cover and the lower Fuser Assembly cover - When opened, routes printed pages to this cover/tray for face-up output |
RG5-7634-000CN | Right side support frame/cover assembly - Includes the frame/cover, printer interface connector, cable, feed drive PC board, and snap-on lid - For the base on the 250-sheet input tray assembly |
RB2-9916-020CN | Cover - For the engaging motor (PM704) - Mounts on the upper left side of the rear frame assembly |
RB3-0120-020CN | Solenoid cover (Steel) - For magnetic wave sheilding - Mounts over the solenoid on the right side of the front frame assembly |
RB3-1140-010CN | Rear cover / face-up output tray - When opened, routes printed pages to this cover/tray for face-up output |
RG5-7604-010CN | Rear cover/face-up output tray assembly - Includes the tray/cover and the lower Fuser Assembly cover - When opened, routes printed pages to this cover/tray for face-up output |